Resin CPX-LF is a flame retardant, firm resin for nylon, raschel nets, sheers, tulle and maline fabrics. The product falls below OSHA standards for free formaldehyde.

Net Resin LF is a flameproof, firm resin designed strictly for nylon nets to give maximum flame retardancy and maximum firmness required for nylon netting.

Comproset M80-LF is a modified, low free formaldehyde, methylated UF resin designed to give “spring & bounce to cellulosic and synthetic fabrics. Its performance on spuns is exceptional when wrinkle recovery is of prime importance.

Comproset IOF is a methylated UF resin for most types of fabric. When applied to cotton and rayon it will produce a soft hand with “spring and bounce”. On synthetics it will impart firmness.

Comproset A3 is a partially polymerized UF resin designed to impart bulk and stiffness to a variety of fabrics. It can be used alone or in conjunction with a variety of resins to achieve linen type “hands” on cotton, acetate, rayon and blends. It has a fast curing rate with less chance of tendering fabrics or developing formaldehyde odor.

Comprothane 0641 is a new, water-based,  polyurethane finishing auxiliary. Improved film clarity and gloss are offered in this new product. The product offers unsurpassed adhesion with high flexibility, elongation, and breathability over conventional finishes.

Compromel C3 is an 80% active, melamine resin for textile finishing. Adding the resin to finishing formulations will impart durable body and firmness. A wide variety of “hands” can be achieved on all types of fabrics.

Catalyst AC-25 is a latent salt based  catalyst designed for resin formulations. It is faster acting than most catalysts and will minimize color change and not yellow when used properly to produce a resin finished fabric with a near neutral pH.

Catalyst CAC is an amine based high end catalyst designed for resin formulations. It has many key elements designed to minimize color change and to produce a resin finished fabric with a near neutral pH. The product can also retain the “white” on white goods. Because of its chemical make-up, it can reduce free formaldehyde levels in resin treated fabric.

Catalyst FAC is an amine based high end catalyst designed for resin formulations. It has the same key elements as our Catalyst CAC except it is faster acting. It is designed to minimize color change and to produce a resin finished fabric with a near neutral pH.

Comprofix is a substantive resinous compound designed to fix direct dyes on cotton and rayon. It can drastically reduce bleeding and crocking of direct colors, as well as increase the fastness properties. It can be applied by exhaustion or padding.

Comprofix NF is a substantive non-formaldehyde resinous compound designed to fix direct dyes on cotton and rayon. The product is highly effective on textiles that have been dyed with direct, reactive, sulfur and azo dyes.

Compromine H is a water-soluble, high solids cationic softener and antistatic auxiliary. It is produces a full supple “hand” in resin formulations.

Comprosoft ECS is a 25% solids, water-soluble, nonionic proprietary reacted silicone softening auxiliary. It is superior in increasing slip resistance and increasing sewability. It will impart durable softness on synthetic and cellulosic blends to repeated launderings.

Comprosoft M-Plus is a water-soluble, combination of cationic fatty acid/silioxane softener for all types of fibers. It is strong in charge and ensures rapid exhaustion. It also exhibits very good anti-static properties

Comprosoft DP is a water-soluble, high solids, nonionic, proprietary monstearate softening auxiliary. It is superior in retaining whiteness and increasing sewability. Comprosoft DP will impart a soft hand with improved stain release and it is compatible with most finishing agents.

Softener W-LP is a cationic polyolefin, quatenary-polysiloxane softener designed to give a soft, silky hand with loft to fabrics. It is non yellowing and can be used on all types of fibers. It is durable and features controlled absorption onto the fiber.

Ramine H is a water-soluble, high solids tallow based cationic softener and antistatic auxiliary. It is produces a full, enriched, supple “hand” when applied by exhaustion. It carries a strong cationic charge and has excellent anti static properties as well as lubricity. The product can also reduce bleeding and improve wet and dry crockfastness on direct dyeings of cotton.

Polynon Softener is a 45% high solids, nonionic high-density polyethylene softener. Its fine particle size offers higher tensile strength, and excels in abrasion resistance. The softener offers a smooth hand and is non-chlorine retentive.

Severeen has the unique property of retarding and leveling various dyes while permitting full color yield over time and temperature. In the dyeing of nylon, most retarders will not give full yield of the dyeing cycle.

Unisol is a product designed for quick dispersion, fast wetting, penetration and outstanding leveling of disperse dyes. It can effectively reduce trimer agglomeration in the dye bath. The product enhances dye diffusion and is very easily rinsed.

Nylev is a unique formulation designed for the dyeing and leveling of Nylon. It is a moderate foamer that aids in the dispersion of the dye with outstanding leveling properties.

Carrier LO is a self emulsified dye carrier for the dyeing of polyester. It is low in odor and threshold levels are ½ of chlorinated dye carriers. The product will form a very stable emulsion even at high temperature without precipitating out.

Carrier OMB is a dye carrier designed mainly for polyester yarns. The product can effectively reduce variations in affinity while promoting the leveling out capacity of the dyes. It should be used when the dyeing time is being reduced or when there is trouble with disperse dyes covering variations in the yarn.

Blandeen is a strong anionic product designed for the dyeing of polyester. It is a highly effective leveling and dispersing agent. High color yield and coverage is maximized with this product.

Comprosperse LF is a low foaming dye dispersant for polyester yarns and ensures bath stability and dispersion.. By adding the product to the dye bath inhibits agglomeration of trimers and keeps them from depositing on the yarn.

Comprowet  is a moderately foaming wetting agent for nylon and other synthetics. It will ensure bath stability and dispersability. By adding the product to the finishing bath, it will ensure even distribution of the finish and help to eliminate “fish eyes”.

Compropal 102 is a 100 % solids biodegradable nonionic, octyl phenol, surface active agent containing approximately 12 mols of ethylene oxide. It is an extremely powerful emulsifier, wetting agent and detergent. Compropal 102 can withstand high temperatures in scouring without phasing out.

Compropal 114 LF is a highly concentrated, low foaming scouring agent. It is biodegradable and offers excellent stability in the presence of alkaline agents, salts, etc. It has excellent emulsification properties and it is stable over a wide pH range.

Scour 100 is a 100% active, environmentally friendly solvent scouring auxiliary. It is a rapid wetter with excellent emulsification properties for the removal of various oils, dirt, grease and even tar. The product can improve the dyeing and leveling of all dyestuffs including, basic, acid, disperse, etc.